-
Updating Firmware on uSDX+
I recently acquired a used –and seemingly a little faulty– uSDX+. These are the little SDR transceivers all over eBay based on the tr(uSDX) devleopment and produced by a plethora of vendors of varying quality. I believe mine is what is called the ‘white buttons’ model — in reference to the different variations that turn…
-
Building the “Handi-Finder”!
A few months back I got a chance to head out on another fox hunt in the same public conservation land. Again, using the Yagi with 4Mhz offset attenuator, I was able to quickly locate the general area of each fox, but up close to such strong signals (5W Baofeng transmitters), I was again completely…
-
Boxing the Fox: Packing up the Foxhunt Transmitter
While a collection of pieces sitting on the bench is great for playing around, if I plan to deploy my foxhunt transmitter to the real world, I need to package it up for the outdoors. Many of the larger foxhunt transmitters seem to use ammo cases or pelican cases, which should be fairly waterproof. Trying…
-
Arduino Fox Hunt Controller: Adding Morse Code and Auto Deactivation
Since the Mic and Speaker on the Baofeng share a pin, I found I can use the same pin I use to monitor the DTMF to output CW as well. Quick software update, borrowing heavily from the code I found for the DTMF foxhunt controller, which included functionality to tone out CW messages, I was…
-
Arduino Foxhunt Controller for Baofeng: Adding DTMF Control
I came across a series of Youtube videos which referred me to a now defunct website where someone had posted Arduino codes for a couple of foxhunt controllers– one of which used DTMF codes to activate/deactivate or play special tone sequences. I thought that sounded nifty to potentially add to my controller, so I eventually…